UZ-LINE
UZ12 ULTRALIGHT UZ15 RAPID UZ18 HardWorker UZ29 SPEEDER UZ30 EXPRESS UZ47 SKILLMASTER UZ50 TRIUMPH UZ100 BOLD Bevelling Solver
B-LINE
B2 AIR B3 B10 ELECTRA B15 ELECTRA B15 ELECTRA NG Xpipe Beveler B-DOCK B15 AIR B22 ZERO
PIPE-LINE
Xpipe Beveler TWISTER Pipe edge bevelling tool Stinger 300
G-LINE
​Belt grinder RUNNER 75
Tools
TWISTER Pipe edge bevelling tool MolyINOX - cutting fluid for metal machining Mag Brush Magnetic sweeper ECO cutter for UZ12 ULTRALIGHT PVD cutter for UZ12 ULTRALIGHT INOX cutter for UZ12 ULTRALIGHT ECO cutter for UZ15 and UZ18 PVD cutter for UZ15 and UZ18 PREMIUM cutter for UZ15 and UZ18 ECO cutter for UZ29 SPEEDER PVD cutter for UZ29 SPEEDER Cutter for CEVISA machine Cutter for Canadian rotary shearing bevelers

PVD cutter for UZ29 SPEEDER

PVD Cutting tool UZ29 Speeder



Print Share
PVD Cutting tool UZ29 Speeder PVD Cutter UZ29 Speeder - 2+1 free set
PVD Cutting tool UZ29 Speeder PVD Cutter UZ29 Speeder - 2+1 free set
PVD cutter for UZ29 SPEEDER

  • The cutter is designed for UZ29 SPEEDER
  • The cutter can be re-sharped
  • Suitable for tougher materials
Expected life and the recommended care for the tool:
Tools intended for machining by rotary shear are designed for materials with the maximum strength of Rm up to 600 MPa / 87.022 PSI.
Upon the compliance with all conditions specified in the instruction manual, the tool life may be up to 4.000 m / 13.123 ft and more.

Reallisticaly the life is about 2.000 – 3.000 m / 6.561 – 9.842 ft. A tool life is unfluenced by several factors:

Material and its preparation
As already mentioned i tis necessary to adhere to the maximum strength of the machined material.
When bevelling materials with higher than allowable strength the tool life rapidly decreases, but there is also a risk of the destruction of the tool or damaging the drive unit.

The tool life can also be affected by the proparation of the material before machining. If the material at your workshop is cut by burning, you shoud clean the edges intended for bevelling by angle grinder.
When burning, especially when plasma burning, edges of the material might be little bit hardened.
This can have a significant impact on the ultimate tool life.

Care for tool
Also the maintenance of the tool and especially the care for the tool has significant influence on the life of the tool.
During bevelling, it is important to check sharpness of the tool on a regular basis and if it is blund, it is necessary to sharpen it immediately.
If you continue to work with a blunt tool chipping or destruction of the tool might occur.

Working procedure
Also the machining procedure is important. This is thoroughly described in the instruction manual. Generally, when implementing the maximum possible reductions (bevel edge width) machining must be divided into two cuts.
This whole issue is describec in detail in the machine user manual.
Type: Catalogue numbers:
PVD cutting tool
- suitable for tougher materials 		1971
PVD cutting tool
- suitable for tougher materials
- 2 + 1 free set 		1973

Satisfaction Guaranteed
If you are not completely satisfied with cutter you may return it any time within 30 days of the date of Sale for a hassle-free refund of the amount paid for the product. We only specify that the product not be used, damaged, missing components or manufacturer's documentation. Refunds do not include shipping costs. On exchange of defective products, Beveler USA INC will pay for shipping on the outbound replacement product only. Special order or non-stocking items are specifically exempted from this policy and will be assessed an appropriate re-stocking charge. Place your name and order number on the package for efficient identification, and insure all returns for your protection. Please note that we do not pay the shipping charges involved in returning goods.
pvd-cutter-for-uz29-speeder
cortador-pvd-para-uz29-speeder
pvd-fraise-pour-uz29-speeder
cortador-pvd-para-uz29-speeder

INFORMATION ABOUT THE COMPANY

PRODUCTS

EXHIBITIONS

NEWS

Incentives for welding schools

Cookie settings
  • North America
  • español
  • français
  • portugal
Portable version Classic version
 

Queries: 19, time: 16.348 ms, default

Time msSQL QueryRows
0.119 
SET NAMES 'utf8'
.../bevelerusa.com/app/router/RouterFactory.php:47 		0
1.349
explain 
SELECT * 
FROM `products`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products ALL 35
.../bevelerusa.com/app/router/RouterFactory.php:50 		35
0.219
explain 
SELECT `id`, `name`, `en`, `es`, `pt`, `fr` 
FROM `texts` 
WHERE (`page` IN ('Ostatní', 'seo', 'Stránka'))
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE texts ALL 73 Using where
.../bevelerusa.com/app/presenters/BasePresenter.php:87 		73
0.103
explain 
SELECT `id`, `name`, `content` 
FROM `options`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE options ALL 2
.../bevelerusa.com/app/presenters/BasePresenter.php:97 		2
0.087
explain 
SELECT `id`, `name`, `file` 
FROM `images`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE images ALL 7
.../bevelerusa.com/app/presenters/BasePresenter.php:103 		7
0.137
explain 
SELECT `id`, `url`, `name`, `logo` 
FROM `banners` 
WHERE (`position` = 'sidebar-bottom') AND (`status` = 1) 
ORDER BY `sort_order` 
LIMIT 1
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE banners system 1
.../bevelerusa.com/app/model/BannerRepository.php:31 		1
3.446
explain 
SELECT * 
FROM `products` 
WHERE (`products`.`id` = 42)
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products const PRIMARY PRIMARY 4 const 1
.../bevelerusa.com/app/model/ProductRepository.php:31 		1
0.508
explain 
SELECT `id`, `en`, `es`, `pt`, `fr` 
FROM `texts` 
WHERE (`name` = 'Formulář odeslán')
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE texts ALL 73 Using where
.../app/FrontModule/presenters/ProductPresenter.php:169 		1
0.130
explain 
SELECT `id`, `title_en`, `main_image`, `line_text_en`, `title_es`, `title_pt`, `line_text_es`,
`title_fr`, `line_text_pt`, `line_text_fr` 
FROM `products` 
WHERE (`category` LIKE '%|uzline|%') AND (`visible` = 1) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products ALL 35 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-menu-latte-a8c6dceaca64f660ac3e7ca8646f5098.php:27 		9
0.106
explain 
SELECT `id`, `title_en`, `main_image`, `line_text_en`, `title_es`, `title_pt`, `line_text_es`,
`title_fr`, `line_text_pt`, `line_text_fr` 
FROM `products` 
WHERE (`category` LIKE '%|bline|%') AND (`visible` = 1) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products ALL 35 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-menu-latte-a8c6dceaca64f660ac3e7ca8646f5098.php:39 		9
0.087
explain 
SELECT `id`, `title_en`, `main_image`, `line_text_en`, `title_es`, `title_pt`, `line_text_es`,
`title_fr`, `line_text_pt`, `line_text_fr` 
FROM `products` 
WHERE (`category` LIKE '%|pipeline|%') AND (`visible` = 1) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products ALL 35 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-menu-latte-a8c6dceaca64f660ac3e7ca8646f5098.php:51 		3
0.092
explain 
SELECT `id`, `title_en`, `main_image`, `line_text_en`, `title_es`, `title_pt`, `line_text_es`,
`title_fr`, `line_text_pt`, `line_text_fr` 
FROM `products` 
WHERE (`category` LIKE '%|gline|%') AND (`visible` = 1) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products ALL 35 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-menu-latte-a8c6dceaca64f660ac3e7ca8646f5098.php:63 		1
0.126
explain 
SELECT `id`, `title_en`, `main_image`, `line_text_en`, `title_es`, `title_pt`, `line_text_es`,
`title_fr`, `line_text_pt`, `line_text_fr` 
FROM `products` 
WHERE (`category` LIKE '%|tools|%') AND (`visible` = 1) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE products ALL 35 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-menu-latte-a8c6dceaca64f660ac3e7ca8646f5098.php:75 		14
3.719
explain 
SELECT `id`, `photo`, `en`, `es`, `pt`, `fr` 
FROM `gallery` 
WHERE (`product_id` = 42) AND (`removed` = 0) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE gallery ALL 1271 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-view-latte-a4fc87e5d4f784aaf2fce146d707fb24.php:88 		2
2.848
explain 
SELECT `id`, `folder`, `file`, `name_en` 
FROM `files` 
WHERE (`product_id` = 42) AND (`removed` = 0) AND (`en` = 1) 
ORDER BY `id`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE files ALL 1168 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-view-latte-a4fc87e5d4f784aaf2fce146d707fb24.php:103 		0
1.769
explain 
SELECT `id` 
FROM `offers` 
WHERE (`product_id` = 42) AND (`removed` = 0) AND (`lang` = 'en') 
ORDER BY `id`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE offers ALL 595 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-view-latte-a4fc87e5d4f784aaf2fce146d707fb24.php:113 		0
0.779
explain 
SELECT `id`, `code`, `title` 
FROM `videos` 
WHERE (`product_id` = 42) AND (`removed` = 0) AND (`lang` = 'en') 
ORDER BY `id`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE videos ALL 147 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-view-latte-a4fc87e5d4f784aaf2fce146d707fb24.php:124 		0
0.653
explain 
SELECT `id` 
FROM `eshops_links` 
WHERE (`product_id` = 42) AND (`removed` = 0) 
ORDER BY `id`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE eshops_links ALL 6 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-Product-view-latte-a4fc87e5d4f784aaf2fce146d707fb24.php:138 		0
0.071
explain 
SELECT `id`, `url`, `main_image` 
FROM `socials` 
WHERE (`removed` = 0) 
ORDER BY `sorting`
id select_type table type possible_keys key key_len ref rows Extra
1 SIMPLE socials ALL 5 Using where; Using filesort
/home/html/innoit.savana-hosting.cz/public_html/bevelerusa.com/temp/cache/latte/com-app-FrontModule-templates-layout-latte-dab89f9a483ca6b0d2c00fd875c699b8.php:335 		5
¤ ×

Front:Product:view

https://www.bevelerusa.com/en/products/pvd-cutter-for-uz29-speeder/?version=mobile

Matched? Class Mask Defaults Module Request
no Route index.php presenter = Front:Default
action = default
no Route admin64/<lang en|es|fr|pt>/<presenter>/<action> presenter = Default
action = default
 Admin
no Route admin64/<presenter>/<action> presenter = Default
action = default
 Admin
no Route <lang en|es|fr|pt>/category/<id> presenter = Product
action = default
 Front
no Route en/products/b5/ lang = en
presenter = Product
action = view
id = 
1
Front
no Route en/products/uz15-rapid/ lang = en
presenter = Product
action = view
id = 
4
Front
no Route en/products/uz30-express/ lang = en
presenter = Product
action = view
id = 
5
Front
no Route en/products/uz50-triumph/ lang = en
presenter = Product
action = view
id = 
6
Front
no Route en/products/b22-zero/ lang = en
presenter = Product
action = view
id = 
24
Front
no Route en/products/cutter-for-canadian-rotary-shearing-bevelers/ lang = en
presenter = Product
action = view
id = 
23
Front
no Route en/products/eco-cutter-for-uz15-and-uz18/ lang = en
presenter = Product
action = view
id = 
7
Front
no Route en/products/premium-cutter-for-uz15-and-uz18/ lang = en
presenter = Product
action = view
id = 
8
Front
no Route en/products/cutter-for-cevisa-machine/ lang = en
presenter = Product
action = view
id = 
9
Front
no Route en/products/b15-air/ lang = en
presenter = Product
action = view
id = 
11
Front
no Route en/products/uz12-ultralight/ lang = en
presenter = Product
action = view
id = 
13
Front
no Route en/products/b3/ lang = en
presenter = Product
action = view
id = 
14
Front
no Route en/products/eco-cutter-for-uz12-ultralight/ lang = en
presenter = Product
action = view
id = 
15
Front
no Route en/products/b2-air/ lang = en
presenter = Product
action = view
id = 
25
Front
no Route en/products/b15-electra/ lang = en
presenter = Product
action = view
id = 
26
Front
no Route en/products/magnetic-sweeper/ lang = en
presenter = Product
action = view
id = 
40
Front
no Route en/products/pvd-cutter-for-uz15-and-uz18/ lang = en
presenter = Product
action = view
id = 
27
Front
no Route en/products/pvd-cutter-for-uz12-ultralight/ lang = en
presenter = Product
action = view
id = 
28
Front
no Route en/products/b10-electra/ lang = en
presenter = Product
action = view
id = 
29
Front
no Route en/products/uz18-hardworker/ lang = en
presenter = Product
action = view
id = 
30
Front
no Route en/products/belt-grinder-runner-75/ lang = en
presenter = Product
action = view
id = 
34
Front
no Route en/products/uz29-speeder/ lang = en
presenter = Product
action = view
id = 
39
Front
no Route en/products/eco-cutter-for-uz29-speeder/ lang = en
presenter = Product
action = view
id = 
41
Front
yes Route en/products/pvd-cutter-for-uz29-speeder/ lang = en
presenter = Product
action = view
id = 
42
Front Front:Product:view
lang = en
id = 
42
version = mobile
no Route en/products/mag-brush/ lang = en
presenter = Product
action = view
id = 
46
Front
no Route en/products/xpipe-beveler/ lang = en
presenter = Product
action = view
id = 
47
Front
no Route en/products/b-dock/ lang = en
presenter = Product
action = view
id = 
48
Front
no Route en/products/stinger-300/ lang = en
presenter = Product
action = view
id = 
49
Front
no Route en/products/bevelling-solver/ lang = en
presenter = Product
action = view
id = 
50
Front
no Route en/products/twister-pipe-edge-bevelling-tool/ lang = en
presenter = Product
action = view
id = 
51
Front
no Route en/products/inox-cutter-for-uz12-ultralight/ lang = en
presenter = Product
action = view
id = 
52
Front
no Route en/products/molyinox-cutting-fluid-for-metal-machining/ lang = en
presenter = Product
action = view
id = 
53
Front
no Route en/products/b15-electra-ng/ lang = en
presenter = Product
action = view
id = 
54
Front
no Route en/products/uz47-skillmaster/ lang = en
presenter = Product
action = view
id = 
55
Front
no Route en/products/uz100-bold/ lang = en
presenter = Product
action = view
id = 
56
Front
no Route es/products/b5/ lang = es
presenter = Product
action = view
id = 
1
Front
no Route es/products/uz15-rapid/ lang = es
presenter = Product
action = view
id = 
4
Front
no Route es/products/uz30-express/ lang = es
presenter = Product
action = view
id = 
5
Front
no Route es/products/uz50-triumph/ lang = es
presenter = Product
action = view
id = 
6
Front
no Route es/products/b22-zero/ lang = es
presenter = Product
action = view
id = 
24
Front
no Route es/products/cortador-para-otros-biseladores-rotativos/ lang = es
presenter = Product
action = view
id = 
23
Front
no Route es/products/cortador-eco-para-uz15-y-uz18/ lang = es
presenter = Product
action = view
id = 
7
Front
no Route es/products/cortador-premium-para-uz15-y-uz18/ lang = es
presenter = Product
action = view
id = 
8
Front
no Route es/products/fresadora-para-la-maquina-cevisa/ lang = es
presenter = Product
action = view
id = 
9
Front
no Route es/products/b15-air/ lang = es
presenter = Product
action = view
id = 
11
Front
no Route es/products/uz12-ultralight/ lang = es
presenter = Product
action = view
id = 
13
Front
no Route es/products/b3/ lang = es
presenter = Product
action = view
id = 
14
Front
no Route es/products/cortador-eco-para-uz12-ultralight/ lang = es
presenter = Product
action = view
id = 
15
Front
no Route es/products/b2-air/ lang = es
presenter = Product
action = view
id = 
25
Front
no Route es/products/b15-electra/ lang = es
presenter = Product
action = view
id = 
26
Front
no Route es/products/barredora-magnetica/ lang = es
presenter = Product
action = view
id = 
40
Front
no Route es/products/cortador-pvd-para-uz15-y-uz18/ lang = es
presenter = Product
action = view
id = 
27
Front
no Route es/products/cortador-pvd-para-uz12-ultralight/ lang = es
presenter = Product
action = view
id = 
28
Front
no Route es/products/b10-electra/ lang = es
presenter = Product
action = view
id = 
29
Front
no Route es/products/uz18-hardworker/ lang = es
presenter = Product
action = view
id = 
30
Front
no Route es/products/belt-grinder-runner-75/ lang = es
presenter = Product
action = view
id = 
34
Front
no Route es/products/uz29-speeder/ lang = es
presenter = Product
action = view
id = 
39
Front
no Route es/products/cortador-eco-para-uz29-speeder/ lang = es
presenter = Product
action = view
id = 
41
Front
no Route es/products/cortador-pvd-para-uz29-speeder/ lang = es
presenter = Product
action = view
id = 
42
Front
no Route es/products/mag-brush/ lang = es
presenter = Product
action = view
id = 
46
Front
no Route es/products/xpipe-beveler/ lang = es
presenter = Product
action = view
id = 
47
Front
no Route es/products/b-dock/ lang = es
presenter = Product
action = view
id = 
48
Front
no Route es/products/stinger-300/ lang = es
presenter = Product
action = view
id = 
49
Front
no Route es/products/bevelling-solver/ lang = es
presenter = Product
action = view
id = 
50
Front
no Route es/products/twister-herramienta-de-biselado-de-bordes-de-tubos/ lang = es
presenter = Product
action = view
id = 
51
Front
no Route es/products/herramienta-de-corte-inox-para-uz12-ultralight/ lang = es
presenter = Product
action = view
id = 
52
Front
no Route es/products/molyinox-fluido-de-corte-molibdenizado-para-el-mecanizado-de-metales/ lang = es
presenter = Product
action = view
id = 
53
Front
no Route es/products/b15-electra-ng/ lang = es
presenter = Product
action = view
id = 
54
Front
no Route es/products/uz47-skillmaster/ lang = es
presenter = Product
action = view
id = 
55
Front
no Route es/products/uz100-bold/ lang = es
presenter = Product
action = view
id = 
56
Front
no Route fr/products/b5/ lang = fr
presenter = Product
action = view
id = 
1
Front
no Route fr/products/uz15-rapid/ lang = fr
presenter = Product
action = view
id = 
4
Front
no Route fr/products/uz30-express/ lang = fr
presenter = Product
action = view
id = 
5
Front
no Route fr/products/uz50-triumph/ lang = fr
presenter = Product
action = view
id = 
6
Front
no Route fr/products/b22-zero/ lang = fr
presenter = Product
action = view
id = 
24
Front
no Route fr/products/coupeurs-pour-d-autres/ lang = fr
presenter = Product
action = view
id = 
23
Front
no Route fr/products/eco-fraise-pour-uz15-et-uz18/ lang = fr
presenter = Product
action = view
id = 
7
Front
no Route fr/products/premium-fraise-pour-uz15-et-uz18/ lang = fr
presenter = Product
action = view
id = 
8
Front
no Route fr/products/fraise-pour-la-machine-cevisa/ lang = fr
presenter = Product
action = view
id = 
9
Front
no Route fr/products/b15-air/ lang = fr
presenter = Product
action = view
id = 
11
Front
no Route fr/products/uz12-ultralight/ lang = fr
presenter = Product
action = view
id = 
13
Front
no Route fr/products/b3/ lang = fr
presenter = Product
action = view
id = 
14
Front
no Route fr/products/eco-fraise-pour-uz12-ultralight/ lang = fr
presenter = Product
action = view
id = 
15
Front
no Route fr/products/b2-air/ lang = fr
presenter = Product
action = view
id = 
25
Front
no Route fr/products/b15-electra/ lang = fr
presenter = Product
action = view
id = 
26
Front
no Route fr/products/balayeuse-magnetique/ lang = fr
presenter = Product
action = view
id = 
40
Front
no Route fr/products/pvd-fraise-pour-uz15-et-uz18/ lang = fr
presenter = Product
action = view
id = 
27
Front
no Route fr/products/pvd-fraise-pour-uz12-ultralight/ lang = fr
presenter = Product
action = view
id = 
28
Front
no Route fr/products/b10-electra/ lang = fr
presenter = Product
action = view
id = 
29
Front
no Route fr/products/uz18-hardworker/ lang = fr
presenter = Product
action = view
id = 
30
Front
no Route fr/products/ponceuse-a-bande-runner-75/ lang = fr
presenter = Product
action = view
id = 
34
Front
no Route fr/products/uz29-speeder/ lang = fr
presenter = Product
action = view
id = 
39
Front
no Route fr/products/eco-fraise-pour-uz29-speeder/ lang = fr
presenter = Product
action = view
id = 
41
Front
no Route fr/products/pvd-fraise-pour-uz29-speeder/ lang = fr
presenter = Product
action = view
id = 
42
Front
no Route fr/products/mag-brush/ lang = fr
presenter = Product
action = view
id = 
46
Front
no Route fr/products/xpipe-beveler/ lang = fr
presenter = Product
action = view
id = 
47
Front
no Route fr/products/b-dock/ lang = fr
presenter = Product
action = view
id = 
48
Front
no Route fr/products/stinger-300/ lang = fr
presenter = Product
action = view
id = 
49
Front
no Route fr/products/bevelling-solver/ lang = fr
presenter = Product
action = view
id = 
50
Front
no Route fr/products/twister-outil-de-biseautage-des-bords-de-tuyaux/ lang = fr
presenter = Product
action = view
id = 
51
Front
no Route fr/products/outil-de-coupe-inox-pour-uz12-ultralight/ lang = fr
presenter = Product
action = view
id = 
52
Front
no Route fr/products/molyinox-fluide-de-coupe-molybdenise-pour-l-usinage-des-metaux/ lang = fr
presenter = Product
action = view
id = 
53
Front
no Route fr/products/b15-electra-ng/ lang = fr
presenter = Product
action = view
id = 
54
Front
no Route fr/products/uz47-skillmaster/ lang = fr
presenter = Product
action = view
id = 
55
Front
no Route fr/products/uz100-bold/ lang = fr
presenter = Product
action = view
id = 
56
Front
no Route pt/products/b5/ lang = pt
presenter = Product
action = view
id = 
1
Front
no Route pt/products/uz15-rapid/ lang = pt
presenter = Product
action = view
id = 
4
Front
no Route pt/products/uz30-express/ lang = pt
presenter = Product
action = view
id = 
5
Front
no Route pt/products/uz50-triumph/ lang = pt
presenter = Product
action = view
id = 
6
Front
no Route pt/products/b22-zero/ lang = pt
presenter = Product
action = view
id = 
24
Front
no Route pt/products/cortadores-para-outros-cisalhadores-de-cisalhamento-rotativo/ lang = pt
presenter = Product
action = view
id = 
23
Front
no Route pt/products/cortador-eco-para-uz15-e-uz18/ lang = pt
presenter = Product
action = view
id = 
7
Front
no Route pt/products/cortador-premium-para-uz15-e-uz18/ lang = pt
presenter = Product
action = view
id = 
8
Front
no Route pt/products/fresa-para-maquina-cevisa/ lang = pt
presenter = Product
action = view
id = 
9
Front
no Route pt/products/b15-air/ lang = pt
presenter = Product
action = view
id = 
11
Front
no Route pt/products/uz12-ultralight/ lang = pt
presenter = Product
action = view
id = 
13
Front
no Route pt/products/b3/ lang = pt
presenter = Product
action = view
id = 
14
Front
no Route pt/products/cortador-eco-para-uz12-ultralight/ lang = pt
presenter = Product
action = view
id = 
15
Front
no Route pt/products/b2-air/ lang = pt
presenter = Product
action = view
id = 
25
Front
no Route pt/products/b15-electra/ lang = pt
presenter = Product
action = view
id = 
26
Front
no Route pt/products/vassoura-magnetica/ lang = pt
presenter = Product
action = view
id = 
40
Front
no Route pt/products/cortador-pvd-para-uz15-e-uz18/ lang = pt
presenter = Product
action = view
id = 
27
Front
no Route pt/products/cortador-pvd-para-uz12-ultralight/ lang = pt
presenter = Product
action = view
id = 
28
Front
no Route pt/products/b10-electra/ lang = pt
presenter = Product
action = view
id = 
29
Front
no Route pt/products/uz18-hardworker/ lang = pt
presenter = Product
action = view
id = 
30
Front
no Route pt/products/belt-grinder-runner-75/ lang = pt
presenter = Product
action = view
id = 
34
Front
no Route pt/products/uz29-speeder/ lang = pt
presenter = Product
action = view
id = 
39
Front
no Route pt/products/cortador-eco-para-uz29-speeder/ lang = pt
presenter = Product
action = view
id = 
41
Front
no Route pt/products/cortador-pvd-para-uz29-speeder/ lang = pt
presenter = Product
action = view
id = 
42
Front
no Route pt/products/mag-brush/ lang = pt
presenter = Product
action = view
id = 
46
Front
no Route pt/products/xpipe-beveler/ lang = pt
presenter = Product
action = view
id = 
47
Front
no Route pt/products/b-dock/ lang = pt
presenter = Product
action = view
id = 
48
Front
no Route pt/products/stinger-300/ lang = pt
presenter = Product
action = view
id = 
49
Front
no Route pt/products/bevelling-solver/ lang = pt
presenter = Product
action = view
id = 
50
Front
no Route pt/products/twister-ferramenta-para-biselar-arestas-de-tubos/ lang = pt
presenter = Product
action = view
id = 
51
Front
no Route pt/products/ferramenta-de-corte-inox-para-uz12-ultralight/ lang = pt
presenter = Product
action = view
id = 
52
Front
no Route pt/products/molyinox-fluido-de-corte-molibdenizado-para-usinagem-de-metais/ lang = pt
presenter = Product
action = view
id = 
53
Front
no Route pt/products/b15-electra-ng/ lang = pt
presenter = Product
action = view
id = 
54
Front
no Route pt/products/uz47-skillmaster/ lang = pt
presenter = Product
action = view
id = 
55
Front
no Route pt/products/uz100-bold/ lang = pt
presenter = Product
action = view
id = 
56
Front
no Route <lang en|es|fr|pt>/kontakt/ presenter = Contact
action = default
 Front
no Route <lang en|es|fr|pt>/aktuality/ presenter = News
action = default
 Front
no Route <lang en|es|fr|pt>/incentives/ presenter = Incentives
action = default
 Front
may Route <lang en|es|fr|pt>/<presenter>/<action>[/<id>] presenter = Default
action = default
id = 
NULL
Front Front:Products:pvdCutterForUz29Speeder
lang = en
id = 
NULL
version = mobile
may Route <presenter>/<action>[/<id>] presenter = Default
action = default
id = 
NULL
Front Front:En:products
id = pvd-cutter-for-uz29-speeder
version = mobile

App\FrontModule\ProductPresenter::renderView() in .../app/FrontModule/presenters/ProductPresenter.php:101

¤ ×

Unlogged

no identity

¤ ×